Home > Published Issues > 2020 > Volume 8, No. 3, September 2020 >

Displacement Measurement of Steel Pipe Support Using Image Processing Technology

Dae-Geun Kim, Kyung-Jae Shin, and Jong-Hun Woo
Kyungpook National University, Daegu, Republic of Korea

Abstract—There are two types of devices, contact and noncontact sensor, for measuring the displacement of a building during construction. The contact sensors are not easy to set up but relatively cheap. On the other hands, the non-contact sensors are easy to install but expensive. In order to consider the economic aspect, the displacement measurement technique using the image base is emerging. In this paper, displacement of steel pipe support was measured by using displacement gauges and image processing technique with pattern. Based on the experiment, the load-displacement curves and the mean error were compared and evaluated with the results of image processing. This study investigates the possibility of replacing the existing displacement gauges with image processing technology.

Index Terms—displacement measurement, steel pipe support, image, pattern, color

Cite: Dae-Geun Kim, Kyung-Jae Shin, and Jong-Hun Woo, "Displacement Measurement of Steel Pipe Support Using Image Processing Technology," Journal of Image and Graphics, Vol. 8, No. 3, pp. 80-84, September 2020. doi: 10.18178/joig.8.3.80-84

Copyright © 2020 by the authors. This is an open access article distributed under the Creative Commons Attribution License (CC BY-NC-ND 4.0), which permits use, distribution and reproduction in any medium, provided that the article is properly cited, the use is non-commercial and no modifications or adaptations are made.